PDA

View Full Version : FC3s mazda exhaust ports, question



rx3sp
01-19-2005, 04:46 PM
I am building my first road race car. Tired of Spec Miata (sold!)

I have been told by my engine builder that this thing in the exhaust port is part of the "smog system" and can legally be removed.
I know that Mazdatrix in Cali says not to remove, buy my guy says I need to spend the money to remove it, and it is illegal to use the Turbo housings. It sounds legit to me.
Opinions??

http://www.mazdatrix.com/faqpics/porting/6pexh1.jpg

If that pic doesn't show up, click here:

http://www.mazdatrix.com/faqpics/porting/6pexh1.jpg

If that doesn't work, cut and paste this into your browser window.

http://www.mazdatrix.com/faq/6pexh.htm

thanks, Donny F

C. Ludwig
01-19-2005, 05:13 PM
The baffle is there for noise reduction. There are two ways to remove it. One is to cut it out which is going to be considered porting and will be illegal. The other is to pull the roll pins that hold it in and swap it with sleeve out of a turbo housing. This is also illegal because the turbo parts aren't included on the spec line. In reality the baffle isn't costing you enough HP to worry about.

------------------
Chris Ludwig
08 ITS RX7 CenDiv

GKR_17
01-19-2005, 08:18 PM
Removing that part not even remotely legal, assuming all cars on that spec line came with it. I'd be curious who this guy builds engines for, and what else he thinks is part of the 'smog' system.

seckerich
01-20-2005, 11:14 AM
We always removed that on the car as it was called an exaust silencer and exaust is free. It was found illegal on appeal and we had to put them back. Makes little or no difference in power.
Steve Eckerich
ITS Speedsource RX7

steve s
01-20-2005, 10:10 PM
don't do it it's illegal to remove.also if you do it anyway the sound of the engine change and any good engine builder would hear the difference.did someone say protest.?? not worth it.i have heard guys using the turbo housing and swapping the sleeves another no no.different part number .as you model line.

------------------
steve saney
it-7 /it-a #34

ITANorm
01-21-2005, 01:04 AM
Originally posted by seckerich:
We always removed that on the car as it was called an exaust silencer and exaust is free. It was found illegal on appeal and we had to put them back.

Using the "exhaust is free" argument to apply to the silencer - which is clearly contained in the exhaust port, and inside the housing - is tantamount to saying exhaust valves and all head porting should be free, by the same logic. That's why it's illegal. The intent is that any exhaust system downstream of the head, or rotor housing, is free.

Eagle7
01-28-2005, 07:26 AM
Originally posted by C. Ludwig:
...The other is to pull the roll pins that hold it in and swap it with sleeve out of a turbo housing....
I've got a sleeve that needs replacing (sagging ears), but I can't figure out how to pull the roll pins. Looks like they're in blind holes to me.

Thanks,

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

C. Ludwig
01-28-2005, 01:14 PM
You get a sheet metal screw, run it in the roll pin, and use a slide hammer on that to pull them out.


------------------
Chris Ludwig
08 ITS RX7 CenDiv

[This message has been edited by C. Ludwig (edited January 28, 2005).]

Eagle7
01-30-2005, 12:49 AM
Boy, you make it sound easy - but you got me on the right track. 1 1/2 hours for the 1st pin, 1 for the second, 10 minutes for the third, 5 for the fourth.

Thanks,

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

C. Ludwig
01-30-2005, 02:43 AM
I stayed in a Holiday Inn once.

------------------
Chris Ludwig
08 ITS RX7 CenDiv

wrankin
01-30-2005, 12:22 PM
Great, now that you have it down pat I'll send you my housings and you can do mine. :-)

-bill

C. Ludwig
01-30-2005, 01:10 PM
Marty, can you get a pic of the one that sagged? I've never seen that.

------------------
Chris Ludwig
08 ITS RX7 CenDiv

Eagle7
01-30-2005, 11:25 PM
http://www.i2k.com/~mdoane/DCP_1437.JPG


------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

C. Ludwig
01-31-2005, 01:39 AM
Huh. That's amazin'...

------------------
Chris Ludwig
08 ITS RX7 CenDiv

John Herman
01-31-2005, 11:39 AM
Marty, looks fine to me. I wouldn't have changed it. http://Forum.ImprovedTouring.com/it/wink.gif

Eagle7
01-31-2005, 11:34 PM
A little at a time, John. Another few decades I'll keep you in my sights.

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

Eagle7
01-31-2005, 11:36 PM
Originally posted by wrankin:
Great, now that you have it down pat I'll send you my housings and you can do mine. :-)
-bill
Sure send em over. But I don't drink beer so it'll cost you one pizza slice per housing.

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR