PDA

View Full Version : STRAW POLL - Wheel diameters



Banzai240
01-14-2004, 07:05 PM
I'm just curious, and the other poll is too sidetracked and not specific, so let's try this...


PLEASE, A simple YES or NO answer will suffice. The question is pretty simple. If you have any feedback or changes you'd want, please e-mail them to me and I'll compile them.

My E-Mail is: [email protected]


Would you support the following rule change:



ALL IT cars currently classified with only 13" wheels are allowed a +1/+2" wheel diameter upgrade.

All remaining IT cars are allowed a +1" upgrade over their currently allowed wheel diameter.

Rim width allowance remains the same.



------------------
Darin E. Jordan
SCCA #273080, OR/NW Regions
Auburn, WA
ITS '97 240SX
http://home.comcast.net/~djjordan/Web/DJ_AV1.jpg


[This message has been edited by Banzai240 (edited January 14, 2004).]

Knestis
01-14-2004, 08:38 PM
Yes.

EDIT - Note that it's extremely unlikely that I would take advantage of this with my current car as well.

[This message has been edited by Knestis (edited January 15, 2004).]

chuck baader
01-14-2004, 08:44 PM
yes

------------------
Chuck Baader
SEDIV ITS #36 E30 BMW
Alabama Region Assistant Race Chair, Divisional Registrar

Speed Raycer
01-14-2004, 09:26 PM
Yes (and I wrote the CB about it...)

eh_tony!!!
01-14-2004, 09:32 PM
yes

Jake
01-14-2004, 09:40 PM
yes

Greg Amy
01-14-2004, 09:41 PM
Yes, I would "support" it, as in not oppose it.

However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.

lateapex911
01-14-2004, 09:52 PM
Yes

But I wouldn't take advantage of it.

------------------
Jake Gulick
CarriageHouse Motorsports
ITA 57 RX-7
New England Region
[email protected]

Bill Miller
01-14-2004, 10:40 PM
Yes, w/ the caveat that max wheel size is limited to 17". (was gonna say 16", but I'll be flexible on this one).

------------------
MARRS #25 ITB Rabbit GTI (sold) | MARRS #25 HProd Rabbit
SCCA 279608

pfcs
01-14-2004, 11:39 PM
NO! KISS (keep it simple stupid) Phil


------------------
phil hunt

Quickshoe
01-15-2004, 12:13 AM
No

Turfer
01-15-2004, 12:48 AM
Yes.

Rick

johng
01-15-2004, 01:20 AM
Yes.

01-15-2004, 03:07 AM
YES

jc836
01-15-2004, 04:43 AM
YES

------------------
Grandpa's toys-modded suspensions and a few other tweaks
'89 CRX Si-SCCA ITA #99
'99 Prelude=a sweet song
'03 Dodge Dakota Club Cab V8-Patriot Blue gonna tow

dominojd
01-15-2004, 07:47 AM
YES

------------------
Crazy Joe
#7 ITS pilot

joeg
01-15-2004, 08:47 AM
YES

wayno
01-15-2004, 09:25 AM
Yes. Wrote comp board.

------------------
Wayne Briggs
CenDiv
ITA Capri
Building a SM
Move...Lest Ye Rust!

cherokee
01-15-2004, 09:58 AM
Originally posted by grega:
Yes, I would "support" it, as in not oppose it.

However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.


ditto....this is a Band-Aid on Bigger issues.

x-ring
01-15-2004, 10:15 AM
Yes

slackerjay
01-15-2004, 10:26 AM
YES

wrote comp board

erlrich
01-15-2004, 11:21 AM
YES

------------------
Earl
ITA 240SX in process

Joe Harlan
01-15-2004, 12:42 PM
Yes

RacerBill
01-15-2004, 12:44 PM
yes

although I do not have to take advantage of it, at this time.

ITA_CRX
01-15-2004, 05:00 PM
No.

itmanta
01-15-2004, 05:01 PM
Yes - Even though I just bought a new set of 13x6 revolutions.

Prince Makaha
01-15-2004, 10:01 PM
Yes

moto62
01-15-2004, 10:39 PM
Yes.
Ray

TypeSH
01-16-2004, 12:03 AM
No. This rule would only help a few older cars that came with small wheels. Make it fair to everyone and make the wheel diameter open.

VW16VRacer
01-16-2004, 12:14 AM
Yes

VW16VRacer
01-16-2004, 12:15 AM
Yes

Soflow1
01-16-2004, 05:15 PM
Yes!
----
Rod Strub
#286987

Domino
01-16-2004, 06:39 PM
Yes

dspillrat
01-16-2004, 07:43 PM
Yes..

David Spillman
SEDiv 240Z #18

Chris Wire
01-17-2004, 04:32 PM
Yes.

Although it's unlikely I would take advantage of it either.

No letter to CB.

------------------
Chris Wire
Team Wire Racing
ITS Mazda RX7 #35
[email protected]

shwah
01-17-2004, 09:58 PM
Yes

Chris

oanglade
01-18-2004, 04:59 AM
Yes.

------------------
Ony

dickita15
01-18-2004, 08:28 AM
no one rule as proposed
yes on cars with 14" may run 15"

just solve the specific problem
dick

Ralf
01-18-2004, 01:47 PM
Yes

BulldogRS
01-19-2004, 06:49 PM
Yes.

Greg

Gregg
01-19-2004, 08:49 PM
Yes.

Richy Gonzalez
01-20-2004, 02:05 AM
Yes

------------------
Richy Gonzalez
GB Racing - #24 ITA CRX (http://groups.msn.com/TheGonzalezFamilyRichySheilaandNyah/projectitacrx.msnw)
LAMIN-X Protective Films (http://www.lamin-x.com)

Richy Gonzalez
01-20-2004, 02:06 AM
Yes

------------------
Richy Gonzalez
GB Racing - #24 ITA CRX (http://groups.msn.com/TheGonzalezFamilyRichySheilaandNyah/projectitacrx.msnw)
LAMIN-X Protective Films (http://www.lamin-x.com)

Scott Nutter
01-20-2004, 08:07 PM
Don't Care